提到过滤器厂，官方网站就会想到那些层出不穷的过滤器，一般情况下过滤器按照不同的作用分类可分为很多种。其中一种常见的就是吸油过滤器，该过滤器设在泵的吸入管路上，滤除油箱内的残留污染物质的通过空气孔进入的污染物，起到保护泵的作用。但是为了避免泵产生空穴现象的发生，必须充分注意压力损失，过滤器厂在生产每一种过滤器产品的时候都已经充分的赋予这些产品自身与众不同特点。

Speaking of filter factories, we will think of those filters that emerge endlessly. Generally, filters can be classified into many kinds according to their different functions. One of the common ones is the oil suction filter, which is located in the suction pipeline of the pump. It filters the pollutants from the residual pollutants in the tank through the air holes to protect the pump. However, in order to avoid the occurrence of pump cavitation, full attention must be paid to pressure loss. When producing each filter product, the filter factory has fully endowed these products with their own unique characteristics.

还有以下几种常见的过滤器在生活中是比较常见的，列如高压管路过滤器——通常是设在泵的出口管道上，有保护污染物不进入系统的作用。因此可以控制系统的污染物浓度。但是因为是高压主管路，因此要受泵的脉动和压力冲击，强度要慎重考虑，所以过滤元件的材质。

There are also several common filters in life, such as high-pressure pipeline filters, which are usually located in the outlet pipeline of the pump, to protect pollutants from entering the system. Therefore, the concentration of pollutants can be controlled. However, because it is a high-pressure main circuit, it should be subject to pump pulsation and pressure impact, the strength should be carefully considered, so the material of filter elements.

还有一种是回流过滤器——通常情况下是设在系统的回油管路上，虽是低压管路，但根据传动装置的运转状况，也会出现脉动或压力冲击，所以对元件材质、强度要充分考虑。进口泵。其作用是把系统内产生或侵入的污染物在返回油箱前捕获到。因此它是控制系统污染浓度的有效重要的过滤器。

There is also a reflux filter - usually located in the system's oil return pipeline, although it is a low-pressure pipeline, but according to the operation of the transmission device, there will be pulsation or pressure impact, so the material and strength of components should be fully considered. Import pump. Its function is to capture pollutants generated or intruded into the system before returning to the tank. Therefore, it is an effective and important filter for controlling pollution concentration.